Offset





Rubber Roll CARE®


Soft-Kleen

[/one_third]
Soft-Kleen is an aliphatic, water-miscible solvent wash specially formulated to clean ink and paper residue off of sheet fed blankets, rollers, and equipment.

[/two_third_last]

Color Out, Step One and Step Two

[/one_third]

Step One

is designed to deep clean rollers for a color change, especially for black to yellow color changes. It removes wet and dry ink, pigment stains, Gum

" >gum glaze, varnish, paper coatings, and is gentle on the roller rubber compounds.

Step Two

is a blend of several hydrocarbon solvents designed to remove Step One and prepare the rollers for the ink color.

[/two_third_last]

CRC

[/one_third]
CRC cleans chrome moisture rollers of ink particles, size compounds, oxidation and other contaminants that may interfere with fountain solution distribution, leaving the roller’s surface “hydrophilic” – water receptive.

[/two_third_last]

Deep Kleen Gel

[/one_third] Deep Kleen Gel removes ink deposits out of the pores of the rubber, rejuvenating the rubber surface of both rollers and blankets. Calcium deposits are also removed from the treated surface. The convenient gel form is easier to use and easier to rinse off the roller train.

[/two_third_last]

Deglazer Gel

[/one_third] Deglazer Gel is designed to remove calcium from ink rollers and blankets. The convenient gel form is easier to use and easier to rinse off the roller train.

[/two_third_last]

MRC

[/one_third] MRC is designed for cleaning rollers while the press is at idle speed and is very safe and effective for cleaning metering rollers. MRC is specifically designed to keep metering rollers clean of clay, ink pigment and calcium carbonate/size compounds that can poison the water distribution system.

[/two_third_last]

Roller Lube

[/one_third] Roller Lube is designed for multi-color presses and is used when some of the units on the press are not used while other units are printing a job, coating and lubricating the rollers on the not-used units to allow the rollers to rotate without building up excessive heat.

[/two_third_last]

Quick-Kleen

[/one_third] Quick-Kleen is designed to clean modern rubber compounds. This product meets the aromatic content guideline to be mild on the rollers and blankets but give a strong cleaning performance to thoroughly remove ink.

[/two_third_last]

APA

[/one_third] APA is effective at eliminating alcohol on presses equipped with continuous dampening systems. This alcohol substitute when used in conjunction with FC1000 fountain solution provides a low VOC alcohol replacement package.

[/two_third_last]

FC1000

[/one_third] FC1000 is a one-step alcohol replacement fountain solution specifically formulated to run on aqueous plates. The strong buffer system incorporated in this formula allows it to be used in all but the hardest of water, and is especially useful when running alkaline papers. It has proven to be very successful on continuous dampeners because of its ability to resist feedback on the water rollers.

[/two_third_last]

MP 2000

[/one_third] MP 2000 is a one-step, universal product that does not require alcohol and in most cases, alcohol substitutes. Formulated to run all silver-type and metal plates, MP 2000 is designed especially for the Crestline® continuous feed dampening system.

[/two_third_last]

MP 2000 Poly Plus

[/one_third] MP 2000 Poly Plus is a one-step, universal product that does not require alcohol and in most cases, alcohol substitutes. It is formulated to run polyester and metal plates.

[/two_third_last]

Poly Ad

[/one_third] Poly Ad helps to eliminate background tinting and plate sensitivity. This additive helps the plate to become more water receptive. Poly Ad should be used on Silver Emulsion type plates (paper or polyester) and can also be used on metal plates.

[/two_third_last]

Compound X

[/one_third] Compound X is a specially formulated, deep cleaning, roller deglazing paste that is excellent for use in both the ink train and the Crestline® continuous feed dampener. Compound X removes glaze from rollers and returns them to a “like new” condition for optimum press performance.

[/two_third_last]

SP25

[/one_third] SP25 is an intermediate grain, partially encapsulated, premium grade spray powder made from pure food starches. Overall powder use is decreased by switching to SP25 spray.

[/two_third_last]



Anilox CARE® Cleaning Products


Water based cleaning products

CellRestore
Cell Restore
Click to Enlarge

[/one_third] CellRestore is an industrial strength, non-hazardous anilox roll cleaner. It is formulated with high grade surfactants and solvents to quickly remove inks, dirt and grime from the anilox cell. CellRestore is a water-based product with no flash point solvents. It is simply the safer and more effective alternative to traditional anilox roll cleaners. Compliant with California Clean Air Rule 1171.

[/two_third_last]

CARE® HD-80 Liquid
Care HD 80 liquid
Click to Enlarge

[/one_third] HD-80’s innovative chemistry “fuses” the properties of a high pH

" >pH and low pH
" >pH ink dissolver. The result is a formulation that has the strength and cleaning power required to effectively clean an anilox roll while still providing a safe pH
" >PH.

Only Pamarco’s CARE® HD-80 has this unique chemistry.

[/two_third_last]

CARE® HD-88 Gel
Care HD 88 Gel
Click to Enlarge

[/one_third] HD-80’s innovative chemistry “fuses” the properties of a high pH

" >pH and low pH
" >pH ink dissolver. The result is a formulation that has the strength and cleaning power required to effectively clean an anilox roll while still providing a safe pH
" >PH.

Only Pamarco’s CARE® HD-80 has this unique chemistry.

[/two_third_last]

CARE® Multi-Kleen

[/one_third] Non-flammable and non-corrosive, CARE® Multi-Kleen removes ink, grease and difficult to remove residues. Anti-reposition and soil suspension agents ensure a bright finish. Suitable for spray cleaning or with automatic scrubbers, Multi-Kleen provides excellent cleaning power.

[/two_third_last]

 

Solvent and UV cleaning products

CellRestore
Cell Restore
Click to Enlarge

[/one_third] CellRestore is an industrial strength, non-hazardous anilox roll cleaner. It is formulated with high grade surfactants and solvents to quickly remove inks, dirt and grime from the anilox cell. CellRestore is a water-based product with no flash point solvents. It is simply the safer and more effective alternative to traditional anilox roll cleaners. Compliant with California Clean Air Rule 1171.

[/two_third_last]

DeepClean Ultra

[/one_third] DeepCleen Ultra is a heavy duty flexo/gravure cleaner formulated for the removal of the most challenging of hard dried inks from all types of flexo plates and anilox rollers. It is suitable for aqueous solvent, and UV

" >UV based flexo inks and coatings, and will not attack photopolymer plates, therefore reducing hickies and improving print quality. Formulated from effective and safe detergents and cleaning agents, DeepClean Ultra is developed for deep cleaning as part of a regular maintenance schedule.

[/two_third_last]