NHDT-842

Product-Catalogue

Smart filters for quick results

EROWA products are organized in four logical ranges.

By using the filters, see arrow to left of page, you will easily find  what you are looking for.

Instant access to the General Catalog PDF file.

Ranges

Categories

PreSet 2D+C ITS Chuck 100

Components included
  • Measuring plate with trolley
  • Chuck mounted and aligned on C-axis
  • Digital readout PT 880 with presetting macros
  • EROWA 2D edge sensor

Technical Data

Axis travel X                   240 mm
Axis travel Y                   320 mm
Axis travel Z                   335 mm
Axis encoder C            0.001 mm       
Data display                  Heidenhain Positip 880 with presetting macros
Serial interface            RS 232 for QuickLink
Sensor                          EROWA 2D edge sensor
Compressed air         6 bar, dry & clean
Space requirement   500 x 800 x 1000 mm (L x W x H) 
learn more

PreSet 2D+C ITS Chuck 100

EROWA CMM Qi

Scope of delivery
Manual temperature compensation, hole pattern on the table for EROWA tooling systems, air conditioning unit, calibration sphere ø 25 mm, measuring and presetting software.

Technical Data
Range, X-axis: 600 mm
Range, Y-axis: 700 mm
Range, Z-axis: 500 mm
Maximum distance between table and probe holder (without probe): 668 mm
Maximum distance between the portal: 650 mm
Measuring accuracy: 1.5 µm +L/500 (L in mm)
Environmental conditions: 19°C-21°C Delta 0.5°C / h

Software
Measuring Software: Arco CAD or Metrolog X4
Presetting Software: PreSoft by EROWA

Machine dimensions
Height: 2700 mm
Footprint: 1424x2105 mm
Max. workpiece load: 650 kg
Machine weight (without load) 2350 kg

learn more

EROWA CMM Qi

QuickLink XT Mitsubishi EDM

QuickLinkXT is a simple program for the data transfer from an EROWA presetting station to a machine control system. Presetting data are converted into the machine-specific format at the touch of a button. The transfer  to the control system is effected through a diskette, a USB stick or the network.

learn more

QuickLink XT Mitsubishi EDM

Edge probe PreSet 2D PreSet 2D

learn more

Edge probe PreSet 2D PreSet 2D

PreSet 2D+C ITS Compact Combi

Components included

Measuring plate with trolley
Chuck mounted and aligned on C-axis
Digital readout PT 880 with presetting macros
EROWA 2D edge sensor

Technical Data

Axis travel X                   240 mm
Axis travel Y                   320 mm
Axis travel Z                   335 mm
Data display                  Heidenhain Positip 880 with presetting macros
Serial interface            RS 232 for QuickLink
Sensor                          EROWA 2D edge sensor
Compressed air supply     6 bar, dry & clean
Space requirement    l x w x h, 500 x 800 x 1000 mm
learn more

PreSet 2D+C ITS Compact Combi

PreSet Basic UPC

PreSet Basic is the ideal setup and presetting station for a quick check of the Z-plane or to align the work pieces in the Y-axis. Its stable trolley enables you to place it wherever it makes most sense in terms of work.
learn more

PreSet Basic UPC

PreSet Basic PSW PalletSet W

PreSet Basic is the ideal setup and presetting station for a quick check of the Z-plane or to align the work pieces in the Y-axis. Its stable trolley enables you to place it wherever it makes most sense in terms of work.
learn more

PreSet Basic PSW PalletSet W

PreSet Basic UnoSet

PreSet Basic is the ideal setup and presetting station for a quick check of the Z-plane or to align the work pieces in the Y-axis. Its stable trolley enables you to place it wherever it makes most sense in terms of work.
learn more

PreSet Basic UnoSet

QuickLink XT Ingersoll

QuickLinkXT is a simple program for the data transfer from an EROWA presetting station to a machine control system. Presetting data are converted into the machine-specific format at the touch of a button. The transfer to the control system is effected through a diskette, a USB stick or the network.
learn more

QuickLink XT Ingersoll

QuickLink XT Sodick EDM

QuickLinkXT is a simple program for the data transfer from an EROWA presetting station to a machine control system. Presetting data are converted into the machine-specific format at the touch of a button. The transfer to the control system is effected through a diskette, a USB stick or the network.

learn more

QuickLink XT Sodick EDM

QuickLink XT Makino EDNC

QuickLinkXT is a simple program for the data transfer from an EROWA presetting station to a machine control system. Presetting data are converted into the machine-specific format at the touch of a button. The transfer to the control system is effected through a diskette, a USB stick or the network.
learn more

QuickLink XT Makino EDNC

QuickLink XT Fanuc WEDM

QuickLinkXT is a simple program for the data transfer from an EROWA presetting station to a machine control system. Presetting data are converted into the machine-specific format at the touch of a button. The transfer to the control system is effected through a diskette, a USB stick or the network.
 
learn more

QuickLink XT Fanuc WEDM

QuickLink XT Agievision Tron

QuickLinkXT ist ein einfaches Programm für den Datentransfer vom EROWA Voreinstellplatz an eine Maschinensteuerung. Die ermittelten Voreinstelldaten werden Knopfdruck in das maschinenspezifische Format umgewandelt. Die Übertragung an die Steuerung erfolgt über Diskette, USB Stick oder das Netzwerk.

Das Update für bestehenden QuickLink-Installationen wird unter anderem benötigt bei folgenden Änderungen: 
- Update Betriebssystem
- Update Messsoftware
- Erweiterungen best. QL-Installationen
- Umstellung Kommunikations-Schnittstelle
learn more

QuickLink XT Agievision Tron

QuickLink XT Agievision Cut

QuickLinkXT is a simple program for the data transfer from an EROWA presetting station to a machine control system. Presetting data are converted into the machine-specific format at the touch of a button. The transfer to the control system is effected through a diskette, a USB stick or the network.

learn more

QuickLink XT Agievision Cut

FrameSet Base PreSet 3D CNC nicht für PreSet 3D MAN

learn more

FrameSet Base PreSet 3D CNC nicht für PreSet 3D MAN

EROWA PreSoft

 
learn more

EROWA PreSoft